Care instructions for synthetic turf on terraces

Pay out the widths of artificial grass, always laying them in the same direction. Align them carefully to avoid creases.

Ensure that the edges fit closely together. Trim the outside edges, using the cutter. Repeat on all outside edges.

Place the two widths over the joint, taking care that the two edges meet perfectly. If necessary, trim the edge as little as possible, so as to avoid leaving gaps. Ensure that the fibres always lie in the same direction.

Lift the two edges and place the joining strip underneath to stick them in place. Remove the protective film from the pre-glued joining strip.

Replace the two widths, which should meet perfectly.

Use a double-sided tape for the edge of the installation, or stick it in place, using a polyurethane resin.

For the best results, brush the artificial grass with a hard-bristle brush (or a blower).